PL2303 USB-TTL Serial Converter

With this product, you can connect your circuit design to your computer via USB. There is a PL2303 chip on the board. The Prolific PL2303 USB TTL serial converter board is a USB to serial converter board that allows you to use a USB device in the TTL interface. Data can be transferred from two different busses. Maximum data transfer is provided via USB bus. Supports automatic compression on serial port.

You can communicate between the two by connecting any sensor or breadboard with TTL interface to your computer via USB via this cable. Since the logic voltage and supply voltage are 5V, it can be used easily with many systems. The cable has a standard USB type A connector on one side and a female pin connector on the other.

Compatible Operating Systems:

• Windows 98SE
• Windows ME
• Windows 2000 SP4
• Windows XP SP2 and above (32 & 64 bit)
• Windows Server 2003 (32 & 64 bit)
• Windows Server 2008 / 2008 R2 (32 & 64 bit)
• Windows Vista (32 & 64 bit)
• Windows 7 (32 & 64 bit)

• About this item

  • Pl2303 Usb To Rs232 Ttl Converter Adapter For Arduino Raspberry And Others Adopt Imported Controller Pl2303hx,Which Can Stabilize The Flash With High Speed
  • 500ma Self Recovery Fuse For Protection Two Data Transmission Indicator Can Monitor Data Transfer Status In Real Time
  • Reserve 3.3v And 5v Pin Interface, Easy For The Ddwrt Of Different Voltage System That Need Power The Entire Board Is Coated By High Quality Transparent Heat-Shrinkable Sleeve, Making The Pcb In Insulation State From Outside, So That The Board Won’T Burnt Down By Material Short Cut
  • Electrostatic Package, Insures The Board Will Not Be Damaged Before Use Windows Operating System Above Windows 7 Are Not Supported.
  • 
  •